Roll Die Cutting Machine

Roll Die Cutting Machine

Introduction: 

FD series automatic roll die cutting machine based on international advanced technology, has a high stability, high safety performance, high precision of the finished product, it’s widely used in paper packaging, such as paper box and so on. It adopts micro-computer, human-computer control interface, servo positioning, alternating current frequency converter, automatic counting, manual pneumatic lock plate, photoelectric correcting deviation system, electromagnetic cluth, centralized oil lubrication, overload protection and distinctive gearing.  So it gurantees smooth operations of returning paper and feeding paper, precise positioning and oderly withdrawing. All the key parts and controls of the machine are imported. Such installation can realize the machine in steady pressure, precise positioning, smooth moving, saftey and reliability.

 

Technical Specification

Model 970x550(640) FDZ1080x640 FDZ1200x640 FDZ1400x780

Customized

Max Cutting Area 940x520mm(610) 1050x610mm 1160x610mm 1350x750mm
Max Paper Widht 950mm 1060mm 1180mm 1380mm
Cutting Precision ±0.10-0.2mm
Paper Gram Weight 120-400g/㎡ / 120-600g/㎡ 120-600g/㎡
Production Capacity 100-180 times/min 80-130 times/min
Air Pressure Requirement 0.6Mpa
Air Pressure Consumption 0.25m?/min
Max Cutting Pressure 150T/280T 280T
Max Roller Diameter 1600mm
Stable Running Power 11KW 11KW 14KW 14KW

 

Main structure

1.Worm Gear Structure: Perfect worm wheel and worm transmission system ensures the powerful and steady pressure and makes the cutting accurately while the machine runs with high speed, has features of low noise, smooth running and high cutting pressure

Main base frame, moving frame and top frame are all adopts high strength Ductile Cast Iron QT500-7, which has features of high tensile strength, anti-deformation and anti-fatigable.

roll die cutting machine 2

2.Lubrication System:  Adopts forced lubrication system to ensure main driving oil supply regularly and reduce friction and prolong the machine life, machine will shut down for protection if oil pressure is low. The oil circuit adds a filter to clear the oil and a flow switch to monitor lacking oil. 

roll die cutting machine 3
3. The die-cutting force is provided by a 7.5KW inverter motor driver. It is not only power-saving, but also can realize the stepless speed adjustment, especially when coordinate with the extra large flywheel, which make the die-cutting force strong and steady, and the electricity can be further reduced.
Pneumatic clutch brake: through adjust the air pressure to control the driving torque, low noise and high brake performance. The machine will shut down automatically if overload happened, response sensitive and fast.

roll die cutting machine 4
4. Electrical control pressure: accurate and fast to achieve die-cutting pressure adjustment, The pressure is automatic adjusted through the motor to control the four feet by HMI.It is very convenient and accurate.

roll die cutting machine 5
5. It can die-cut according to the printed words and figures or simply die-cut without them. The coordination between stepping motor and photoelectric eye which can identify colors assures the perfectly fit of the die-cutting position and figures. Simply set the feed length through the micro-computer controller to die-cut the products without words and figures. 

roll die cutting machine 6

6. Electrical cabinet

roll die cutting machine 7

Motor: Frequency converter controls the main motor, with features of low energy and high efficiency. 
PLC and HMI: screen display the running data and status, all of the parameter can be set through the screen. 
Electrical control system: adopts micro computer control, encoder angle detect and control, photoelectric chase and detect, achieving from paper feeding, convey, die-cutting and delivering process automatic control and detect. 
Security devices: machine alarming when failure happens, and automatic shut down for protection.
 

7. Correction Unit: This device is controlled by Motor, which can fix and adjust the paper in a correct position. (left o right)

roll die cutting machine 8

8. Die cutting department adopts pneumatic lock version of the device to avoid come off from the machine.
Die cutting plate: 65Mn steel plate heating treatment, high hardness and flatness.
Die cutting knife plate and plate frame can be take out so that it can save plate-changing time.

roll die cutting machine 9

9. Paper blocked alarm: the alarm system makes the machine stop when paper feeding blocked.

roll die cutting machine 10

10. Feeding Unit: Adopts chain type pneumatic roller unwind, tension controls unwind speed, and that’s hydraumatic, it could support at least 1.5T. Max roll paper diameter 1.6m.

roll die cutting machine 11

11. Load material: Electric roll material loading, which is easy and fast. The two rubber covered rollers are controlled by Traction Motor, so it’s very easy to make paper go forward automatically.

roll die cutting machine 12

12. Automatically fold and flatten the cornering materials at the paper core. It realized the multistage adjustment of the folding degree. No matter how bent the product is, it can be flatten or refolded towards other directions.

roll die cutting machine 13

13. Feed material: the photoelectric eye tracking system assures the synchronization of material feeding and die-cutting speed.

roll die cutting machine 14

14. By the action of the entity induction switch, finished product will be automatically lowered down to remain the height of the pilling paper unchanged, during the whole die-cutting process, manual paper-taking is not needed.

roll die cutting machine 15

Option. Feeding Unit: Adopts and hydraumatic shaftless, it could support 3’’, 6’’, 8’’, 12’’. Max roll paper diameter 1.6m. 

roll die cutting machine 16

 

Electric Configuration

Stepper Motor

China

Pressure adjusting motor

China

Servo driver

Schneider(France)

Color Sensor

Sick(Germany)

PLC

Schneider(France)

Frequency converter

Schneider(France)

All other electrical parts

Germany

Photoelectric switch

Germany

Main air cylinder

China

Main Solenoid valve

AirTAC (Taiwan)

Pneumatic clutch

China

Main bearings

Japan

 

News Center

> Online exhibition

Due to the epidemic situation, most exhibitions at home and abroad have been cancelled, and we ...

> Technical principle and application of die cutting machine

> Feida Starts the Lean Production Project.

Feida Starts the Lean Production Project.

> Feida Team Builiding in Da Luoshan

The team is a powerful group, is everyone's backing, we should have?a grateful heart to learn, ...

> Green trend

Upgrading plastic restrictions is imperative. Green packaging not only represents a trend, but ...

> Feida Machinery Plant Expansion

Feida Machinery builds a new plant on the basis of the original plant to expand the scale of pr...

> 2019 AUTO PRINT 2 PACK CAIRO FAIR

2019 AUTO PRINT 2 PACK CAIRO FAIR. Date: 2019.09.10 - 09.12. Booth No.: Hall1B, R2-8 & R2-9. Fe...

> GULF PRINT & PACK 2019

GULF PRINT & PACK 2019. Date: 2019.04.15 - 04.18. Booth No.: 1C19. Address: Dubai World Trade C...

Want Quote & Solution Now?

XML 地图 | Sitemap 地图